FPGA for dummies - free book


If you are completely new to FPGAs, or if you want a refreshing high level view of what FPGAs are and what are the future trends in the field, you can download this free book from Altera site:

FPGA for dummies

The book is an all-text introduction to this exciting field, do not expect to find real examples nor VHDL code in the book.



Comments

Post a Comment

Popular posts from this blog

VHDL or Verilog?

Image
This question gets asked again and again, by beginners and experienced designers alike. When I saw it posted on the FPGA group at reddit at reddit some time ago, I liked the answer from user fft32, so with his permission, I reproduce it here with some minor changes and additions. VHDL compared to VerilogVHDL: A bit verbose, clunky syntax. I never liked that different constructs have different rules for the "end" tag, like "end synth" for architectures, versus "end component mux" for components. I always find myself looking up the syntax of packages and functions.Strongly typed: It's a bit of a pain to have to make a (0 downto 0) vector to do something like a carry-in, but at the end of the day, it can save you time debugging problems. You don't scratch your head as to why your 10-bit vector is only 0 to 1, because you assigned a 1-bit value to it (a thing you could do in Verilog, but in VHDL would produce a compile error). Also, by default Verilog…
Keep reading

Pseudo random number generator Tutorial

Image
In this tutorial we will see how to design and test a VHDL component. We will start with a very simple block and gradually add features to it. We will also simulate it and test its output with Matlab. Over the process we will see: How to start with a simple block and gradually add features and improvementsHow to add a test bench (simulation)Adding parameters to a VHDL componentSaving the component data output to files (from simulation)Importing the files to Matlab in order to:Verify the results, andAnalyze the results (in this case, using FFT).The tutorial comprises three chapters, and it is divided into three entries of this blog. Make sure that you haven't missed to visit part 2 and part 3 of the tutorial!
For this tutorial it is assumed that you already have basic knowledge of the VHDL language and know how to use simulation tools (We will use the Xilinx's Vivado built in simulator, but you can easily adapt the tutorial to other tools you may be familiar with).

Chapter 1 - …
Keep reading

FPGA internal tri-state buses

Image
For many designers, the first time we saw the internal memory blocks in an FPGA came as a little shock.

Some of us were used to RAM devices used in Board Design. These devices use bidirectional data buses. Even the fastest memories, DDRn DRAMs, use bidirectional data buses ('n' has changed over the years, from plain DDR to current DDR4).

So, how comes that internal memories on an FPGA have TWO data buses? Isn't that a waste of resources? Why don't FPGAs have internal tri-state buses?

Well, until around fifteen years ago, some FPGA devices DID have internal tri-state buffers. With the evolution of semiconductors technology, internal tri-state buffers were abandoned. So today, FPGAs don't have tri-state buffers but have unidirectional buses only. Since most memories are readable and writable, two unidirectional data buses are needed between a controller (CPU, internal FPGA logic) and the memory.

If this answer is enough for you, you can stop reading here. If you wan…
Keep reading